Idiomas disponibles
Idiomas disponibles
Installing Teranex Mini Smart Panel
You can also change settings using the optional Teranex
Mini Smart Panel. This control panel mounts to the front of
your Teranex Mini and replaces the original blank front
panel that shipped with the converter. You get fast access
to your settings using buttons and a rotary knob and you
can see the input on the built in LCD.
Installing your optional Smart Panel is easy and because
the panels are hot swappable you don't even need to turn
off your Teranex Mini converter when installing it.
Step 1.
Remove the two M3 screws on each side of
your converter's basic front panel using a
Pozidriv 2 screwdriver and gently pull the panel
away from the front of your Teranex Mini.
Step 2.
Remove and retain the light tube connecting
the LED to the indicator at the bottom of the
basic panel.
This tube is necessary to illuminate your mini
converter's multi-use indicator when the Smart
Panel is not installed.
Step 3.
Align the connector on the rear of the Smart
Panel with the adjoining connector on the face
of your Teranex Mini converter and gently push
the Smart Panel towards your converter until the
When installing the Teranex Mini Smart Panel to your Teranex Mini, holding the panel with your
fingers and thumb aligned with the panel's rear connector will help guide it into place.
connectors are firmly seated. The Smart Panel
should make a firm connection and fit neatly
inside the face of your Teranex Mini converter.
Step 4.
Re-insert the M3 screws from the original fascia.
If your Teranex Mini is installed in a Teranex Mini Rack Shelf,
you will need to remove the mini converter from the rack
shelf to access the front panel screws.
See the 'Teranex Mini Rack Shelf' section for more
information.
The Teranex Mini's USB port is still accessible with the
Teranex Smart Panel attached. To access the port, simply
open the plastic cover. With the Smart Panel installed, the
front panel small switches are covered up and no longer
used and this is because all the switch settings and more
are now in the menu on the Teranex Smart Panel and can
be set using the LCD. The settings available will vary
between Teranex Mini's because the features are different
between models, but navigation layout on screen is the
same, so it's easy to move between models to make
changes to settings.
Refer to the 'changing settings' section for information on
changing settings using an optional Teranex Mini
Smart Panel.
to Ana log 12G
216 0p5 9.9 4 SDI
0 1 :2 3 :4 7 :0 8
1
2
7
Capítulos
