Intended Use - Forch 5352 2200 Manual De Instrucciones

4. Disposal
■
For disposal, please clean and disassemble in compliance with the applicable labour and
environmental regulations.
■
Please make sure to recycle the different components.
■
Scrap metallic material residues.
5. General
■
The device has been built at the time of its development and production in accordance
with applicable recognized state-of-the-art technology and is considered to be safe to
operate. It is however possible that dangers may arise from the device if it is not used by
professionally trained personnel, improperly or not as intended. Any person that is given
the order to work with or at the device, must therefore have read and understood this
operation manual before starting work.
■
Changes of any kind, as well as additions or modifications to the device are prohibited.
■ All safety, warning and operating instructions on the unit have to be kept in an easily
legible state. Damaged labels or stickers should be replaced immediately.
■
Specified setting values or ranges must be strictly observed.
6. Operator's responsibility
■
Always store operation manual in immediate vicinity to the device.
■
Only operate the device in technically flawless and reliable condition.
■
Make sure that safety devices are always freely accessible and check them regularly.
■
Besides the industrial safety instructions in this operation manual, the general safety,
accident prevention and environmental protection regulations for the field of application
of this device have to be taken into consideration and complied with.

7. Intended use

Operational safety is guaranteed only when used as intended in accordance with the
specifications in the operating instructions. Besides the industrial safety instructions in this
operation manual, the general safety, accident prevention and environmental protection
regulations for the field of application of this device have to be taken into consideration and
complied with.
Use and maintenance have to be executed always in accordance with local state or federal
regulations.
■ The FÖRCH-Angle Grinder has a compressed air controller to adjust the speed. This
Angle Grinder is only suitable for cutting thin-walled steel elements or sheet metal.
■
The improper use of this FÖRCH-pneumatic tool or when using this device not in ac-
cordance with the safety instructions can cause serious injury or death.
■
Any use beyond and/or in deviation of the intended of the device is forbidden and con-
sidered to be inappropriate.
■ Claims of any kind against the manufacturer and/or his authorized representative result-
ing from improper use of the device are excluded.
■
The operator is liable for all damages resulting from improper use.