Ways Of Seat Units; Removing The Seat Units; Adjusting The Back Rest; Footrest Adjustment - i'coo platon duo Instrucciones Para El Uso

7. WAYS OF SEAT UNITS FIG. 11-12 7. WAYS OF SEAT UNITS FIG. 11-12
Please note!!! The seat units can be installed in 2
ways.
Option1 (Fig. 11) allows the rear seat to be brought
into a lying position.
Option 2 (Fig. 12) allows both seats to be brought
solely into a sitting position.
8. REMOVING THE SEAT UNITS FIG. 13 8. REMOVING THE SEAT UNITS FIG. 13
Remove the seat units by pressing both knobs and
lifting the seat unit upwards. Fig. 10
9. ADJUSTING THE BACK REST FIG. 14 9. ADJUSTING THE BACK REST FIG. 14
Adjust the back rest by pulling the metal grip upwards
and move it
into the desired position.
CAUTION: Material that has become jammed can
block the adjusting
mechanism. Please release this carefully and start the
adjustment again.
10. FOOTREST ADJUSTMENT FIG. 14 10. FOOTREST ADJUSTMENT FIG. 14
The footrest can be brought into the required position
by pressing the two
adjusting knobs.
11. SECURE YOUR CHILD FIG. 15-17 11. SECURE YOUR CHILD FIG. 15-17
CAUTION: In order to prevent your child suffering
injuries from falling or sliding
out of the push-chair, secure your child with the
safety belt at all times.
Please also remember that when you lay children in
the push-chair, it is possible
that it can tip over.
If you are only transporting one child is in the push-
chair, please sit it in the
front seat.
When transporting 2 children, place the heavier child
in the front seat.
When taking the children out, first left the child out of
the rear seat.
Fasten the safety belt as follows: Guide the quilted
belt between
the child's legs.
Then fasten the two ends of the pelvis belt together.
Adjust
the width of the belt to fit the child.
GB GB
17 17