Eco Mode" Saving Function; Restarting After A Power Failure; Lock Keypad" Function; Frost Protection Function - Palazzetti EASY TOUCH Traducción De Las Instrucciones Originales

4.2 "ECO MODE" SAVING FUNCTION

Enabling this function means that the stove switches off when reaching the desired room temperature. If
this function is not enabled, the stove modulates operation so as to maintain the desired temperature while
consuming the least amount of fuel possible. The "Eco Mode" function is only available in configuration 2.
To enable/disable the function:
a) Use the arrow buttons
b) Use the
c) Select submenu
d) Set one of the following values using the
Eco
→ "Eco Mode" function enabled
Off
→ "Eco Mode" function disabled
e) Press to confirm the settings.

4.3 RESTARTING AFTER A POWER FAILURE

In the event of power failures, the stove will switch back on automatically, checking the safety conditions, when
power returns.

4.4 "LOCK KEYPAD" FUNCTION

This function is used to disable the use of the control panel and avoid accidental modifications.
To enable/disable the function:
a) Use the arrow buttons
b) Use the
c) Select submenu
d) Use the
Off
" " Lock keypad disabled
"Lo" Only the on/off button
Hi
" " Lock keypad enabled
e) Press to confirm the settings.

4.5 FROST PROTECTION FUNCTION

In configurations 2, 3 and 4 a minimum temperature can be set below which the boiler will switch on (outside of
the set time bands).

Configuration 2:

To set the "frost protection" temperature:
a) Use the arrow buttons
b) Use the
c) Select submenu
d) The value will flash; change it using the
e) Press to confirm the settings.
Configuration 3 and 4:
To set the "frost protection" temperature:
a) Use the arrow buttons
b) Use the
c) Select submenu
d) The value will flash; change it using the
e) Press to confirm the settings.
Setting the value to "OFF" in step d disables the function.
22
to go to the setup menu
button to select the password "7" and then press
[7 ]
and confirm by pressing
to go to the setup menu
button to select the password "7" and then press
[ 1 0]
and confirm by pressing
buttons to set one of the following values:
is enabled
to go to the setup menu
button to select the password "7" and then press
[9]
and confirm by pressing
to go to the setup menu
button to select the password "7" and then press
[9]
and confirm by pressing
004773290 - 22/03/2021
and then press
to confirm;
.
buttons:
and then press
to confirm;
.
and then press
to confirm;
;
OFF 3...20°C
buttons ( ; );
and then press
to confirm;
;
OFF 3...50°C
buttons ( ; );
;
;
;
;