Adjusting The Date And Time - Sanyo ICR-1000 Manual De Instrucciones

ADJUSTING THE DATE AND TIME

1. Slide the operation switch to "STOP".
2. Press and hold the MENU/FOLDER button down at least 2 seconds in
the stop mode. "AUTHOR" appears.
3. Press the MENU/FOLDER button repeatedly until the date and time
display appears.
Example:
0:00
2006
AUG.01
4. Press the TIME/SET button. The year display blinks.
5. Press the + or – VOLUME button repeatedly to select the year.
6. Press the TIME/SET button. The month display blinks.
7. Set the month, day, hour and minute by following steps 4 - 5 above.
• The time can be set accurately by
pressing the TIME/SET button when
a time signal is heard.
8. Press the INDEX/CANCEL button to return to the original display.
Changing the clock to the 12-hour (or 24-hour) display
1. Press and hold the MENU/FOLDER button down at least 2 seconds in
the stop mode.
2. Press the MENU/FOLDER button repeatedly until "12/24" appears.
3. Press the TIME/SET button. "24 HOUR" (or "12 HOUR") blinks.
4. Press the + or – VOLUME button once. "12 HOUR" (or "24 HOUR")
blinks.
5. Press the TIME/SET button again.
6. Press the INDEX/CANCEL button to return to the original display.
MENU/
FOLDER
[ENGLISH]
+ VOLUME –
TIME/SET
Example:
2006
AUG.08
10:35
GB-8