Specifications; Accessories - Toa WT-4800 Instrucciones De Uso

11. SPECIFICATIONS

Power Source
Power Consumption
Receiving Frequency
Selectable Channel
Receiving System
Diversity System
Mixing Output
Mixing Input
Antenna Input
Antenna Output
Receiving Sensitivity
Squelch Sensitivity
Squelch System
Tone Frequency
Indicator
Channel Check
Digital Controlled I/O
S/N Ratio
Harmonic Distortion
Frequency Response
Other Function
Operating Temperature
Finish
Dimensions
Weight
Optional Product
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.

• Accessories

AC – DC adapter ........................................ 1
Rod antenna ............................................... 2
12
AC mains (Supplied AC – DC adapter must be used.)
250 mA (12 V DC)
690 – 865 MHz, UHF
64 frequencies
Double superheterodyne
Space diversity
MIC: –60 dB*/LINE: –20 dB*, 600 Ω
Phone jack (unbalanced), XLR-3-31 type connector (balanced)
–20 dB*, 10 kΩ
Phone jack (unbalanced)
75Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
75Ω, BNC (Gain 0 dB)
Better than 80 dB, S/N ratio (20 dBµV input, 40 kHz deviation)
18 – 40 dBµV variable
Using together of noise SQ, carrier SQ and tone SQ
32.768 kHz
Audio (11 steps), RF (11 steps), ANT A/B, Audio (peak)
Usable frequencies scanning
Usable frequencies reading, frequencies input
Better than 110 dB (A-weight, balanced output)
Less than 1%
100 – 12,000 Hz, ±3 dB
Frequency (Bank/Channel) selection by PC
–10 to +50°C
Resin, black
210 (w) x 44.6 (h) x 180 (d) mm
700 g
Mounting bracket kit: MB-WT1 (for rack mounting one WT-4800 unit)
MB-WT2 (for rack mounting two WT-4800 units)