Care And Cleaning - Allen + Roth BROOKES 21-B45WDCP-AR Manual Del Usuario

INSTALLATION INSTRUCTIONS (Continued)
9. After installation is complete, remove the aerator (9.1) from
the spout (A). Turn on the water supply. Check for leaks at all
waterway connections. If leaks occur, tighten the nuts on the
water connection that is leaking. Fill the sink with water to check
the drain for leaks. If water is leaking from the drain, tighten the
mounting nut on the pop-up drain assembly (D).
After the pop-up drain has been checked for leaks, empty the
sink. Run hot and cold water uninterrupted for at least one minute
to flush away any debris that could cause damage to the internal
parts.Turn off the water and reattach the aerator (9.1) onto the
spout (A).
REPLACING LED AERATOR WITH NON-LIGHTED AERATOR
1. Hold the end of
the faucet spout
(A) and turn the
LED aerator
(1.1) clockwise
to remove it from
the faucet
spout (A).
OPERATING INSTRUCTIONS
The lever handles control the flow of hot and cold water to the faucet. Moving the handle forward
opens the cartridge and causes water to flow from the spout. Rotate the handle on the left side of the
faucet forward for hot water. Rotate the handle on the right side of the faucet forward for cold water.
The degree of handle opening determines the volume of water flow. Returning the handle to the
original position away from the spout on the faucet body stops the flow of water.

CARE AND CLEANING

Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these
will dull the finish and void your warranty.
1
A
1.1
2. Thread the non-
lighted aerator (F)
onto the end of the
spout (A). Hand
tighten, but do not
overtighten.
6
9
9.1
2
A
F
A