Harman JBL Professional VL6A Guia Del Usuario página 17

•
Make sure that the load rod is properly sized for the weight of the system, (we strongly recommend
keeping the coefficient 7:1).
•
In temporary mounts always keep the area below the boxes free of public. In fixed assemblies, give
preference to areas where there is no public under the boxes.
•
Always strictly observe the loading and safety specifications provided by the manufacturers of hoists,
straps and shackles.
•
Whenever necessary, direct the system through the turn, this procedure must be done by the lifting grid
and not through the boxes.
•
All accessories used for system assembly not supplied by JBL are of sole responsibility of the user.
•
It is the user's responsibility to comply with the load and angulation limits provided by JBL.
•
Never replace any element of the suspension system with another that is not supplied by JBL (quick pins,
tie rods, lifting rails, etc.). This will be of sole responsibility of the user.
19. Misuse or inadequate use is not covered by the manufacturer's warranty.
17