Initial Start-Up - Termozeta Classic Air 2000 Manual De Instrucciones

they can benefit from the presence of someone who is responsible
for their safety and who is provided with the instructions for
use.
• The feeding cable of the appliance should never be replaced by the
user himself. In case of necessity contact an assistance centre
authorised by TERMOZETA or professionally qualified staff.
• In case of failure and/or malfunctioning of the appliance, turn it off
and do not tamper with it. For any repairs contact an assistance
centre authorised by TERMOZETA and ask for the use of original
spare parts.
• At the end of the life-cycle of the appliance, put it out of service by
cutting the feeding cable after disconnecting the plug from the outlet.
For the disposal of the appliance follow the regulations which are
valid in your place of residence.
• TERMOZETA cannot be considered responsible for any damage to
persons, animals or things caused by the incorrect installation or as a
result of an illegitimate, mistaken or unreasonable use.

INITIAL START-UP

• Completely unwind the feeding cable (7) and connect the plug to a
suitable power outlet.
• Select the desired airflow/temperature by means of the ON/OFF switch
(1a) and the temperature control switch (1b) and then start drying your
hair.
• If you need to set your hair during drying, press the cold-shot button
(2) while the appliance is running: the airflow distributed at a lower
temperature will help set your hair.
• After use, turn off the appliance by bringing switch (1a) to the 0
position and disconnect the plug from the power outlet.
• The appliance is provided with an eyelet (6) for hanging.
ATTENTION!
• Never use the appliance near bathtubs, washbasins,
containers, etc. full of water or other liquids.
• Never use hairspray while the appliance is running.
• Make sure that your hands and feet are dry and that your hair is not
ENGLISH