StarLab ErgoOne Manual De Usuario página 16

• Remove the O-ring
(Fig. 5).
9
Note:
The piston is subject to spring tension.
• Degrease the piston
disin f ectant and re-lubricate the piston
with original STARLAB piston grease (see
section 8 Ordering I nformation).
A damaged piston must be replaced.
• Reassemble the pipette in the reverse
order.
Fig. 6
16 ErgoOne
, spring and piston
7a 8
using an alcoholic
9
Replacing seals for
models up to 1000µl
• Remove the spacer ring
100µl, 200µl and 1000µl models)
(Fig. 5).
• Remove the sealing ring
tip holder using the auxiliary tool
(Fig. 6) and replace it (see section 8
Ordering Information for replace-
ment sealing ring).
• Reassemble the pipette in the
reverse order.
User Manual
®
Fig. 5
(only
11
from the
10