Operation; Step-By-Step Use - DJO CEFAR REHAB X2 Manual De Instrucciones

5. OPERATION

STEP-BY-STEP USE

12
CEFAR REHAB X2 can be used for both TENS and NMES treatment. Use only those treatment programs
that your health care provider has determined are the most effective for your needs. The stimulator has
two simultaneous channels, which means that both channels stimulate with the same program. A hand
switch is provided to make it easy to manually control muscle contractions in NMES programs.
1. INSERT THE BATTERIES
Insert the batteries (see chapter REPLACEMENT OF BATTERIES ).
2. ATTACH THE ELECTRODES
A. Connect the electrodes to
the cable.
3. CONNECT THE HAND SWITCH
Note! This is only applicable for programs P9–P16 and P19–P23.
4. SWITCH THE STIMULATOR ON
Press the ON/OFF button
nating the stimulation at all times, even when the key lock is activated.
Always switch the stimulation off before removing electrodes from
the skin.
B. Attach the electrodes to
your body.
. This button can be used for termi-
AUTO AUTO
P S
C. Connect the cable to the
CEFAR REHAB X2.