All manuals and user guides at all-guides.com
HDT18PA-MANUAL
10/22/01
Rinse & Hold Cycle:
• This cycle is used for rinsing partial loads that will be washed later. The total wash
time for "Wash Only" cycle is approximately 6 minutes.
Note: Do not use detergent with this cycle.
Vented Dry (On/Off):
• You can select this option at the beginning of the wash cycle to dry your dishware
items. Press the button in to have vented dry option "On" or press the out to have
vented dry option "Off".
Note: When selecting any of the above cycles or options, you will
see the following:
• It will take approximately 60 seconds to begin the wash cycle.
• In wash mode, light will come on indicating that wash cycle is selected.
• In dry mode, light will come on indicating that dry cycle is selected.
• The buzzer will beep at the end of the cycle indicating that cycle
is completed.
Warning: When you leave the door open to air dry those washed items, make
sure there are no children around to go near the dishwasher to climb
over. If there are children around near the dishwasher, pay careful
attention and observation toward children.
Understanding the Venting Process:
• In this process, the hot steam from the dishwasher is being drawn into the drain
pump through its vacuum force and the mix condensation of water and air is
being discharged through the discharge hose from the back of the unit.
11:46 AM
Page 13
TUB
drain hose
hot
stream
drain
pump
one-way valve
English
hot air
and
water
12