Fontastic Xtaz Manual Del Usuario página 3

GB
Connect 2 Xtaz headphones together
Two Xtaz Headphones can be connected via TWS. Two people
can listen to the same audio streaming while watching TV,
listening to music, gaming, etc.
Turn on both headphones at the same time to connect them
together. The headphones connect automatically via TWS.
The audio data is now output via both headphones.
Music playback
Start music playback on the Bluetooth
with the Xtaz. The music is transferred to the Xtaz.
Stop the music playback on the Bluetooth
the streaming.
To start or stop music playback via the Xtaz, press the the
multifunction button 5) once. During music playback, the LED
blinks blue.
You can use the Xtaz as a wired headphone without Bluetooth
function with the 3.5mm jack cable that is included in the
package content. Connect the cable to the 3.5 mm line-in
connector (8) of the Xtaz and the audio source, start playing
music.
Music control
To play or stop music playback, briefly press the multifunction
button (5).
To skip to previous track, press and hold the Volume- button (6).
To skip to the next track, press and hold the Volume+ button (4).
Note: The mobile phone must support the A2DP and AVRCP
profile for music streaming and control. The buttons have no
function when using the wired connection. Use the audio source
to control the music and volume.
Hands-free features
With its built-in microphone and intelligent noise reduction,
the Xtaz is perfectly suitable for phone calls.
Answer/ending calls
To accept an incoming call, briefly press multifunction button (5).
To end a call in progress, briefly press multifunction button (5).
3
source which is paired
®
source to interrupt
®
®
Redial
Press the multifunction button (5) twice to redial the last dialled
number.
Volume setting
To increase the volume, press and hold the volume + button (4)
until the desired volume is reached.
To decrease the volume, press and hold the volume - button (6)
until the desired volume is reached.
Technical data:
• BT Version 5
• Profile: Headset, Handsfree, A2DP, AVRCP
• Range: 10m
• Input: 5V DC
• Frequency: 20Hz-20kHz
• Impedance: 32 Ohm
• Built-in microphone
• 3.5 mm line-in connection
• Status LED: Blau/Rot
• Micro USB connector
• Battery Type: 180 mAh Li
• Operation time: Up to 6 hrs.
• Weight: 192 g
Safety advice:
• Do not open the device
• Do not hold the device under water
• Keep it safe from humidity
• Do not connect the adapter to the device by using force
• Keep the device away from children
• Disconnect electronic devices from the power when not using
them for longer time.
• Do not use the device when it has visible defects.
No liability is accepted for any damage caused by incorrect
operation.
In case you need technical support, please contact our
support-team by e-mail under [email protected].
GB
4