Idiomas disponibles
Idiomas disponibles
If the ambient sound is above 60 dB, the video camera starts recording
and the red LED will flash slowly (once per second) If the ambient sound
lowers below 60dB for 2 minutes, the camcorder will enter in Standby
Mode and the red LED will start flashing slowly. During the Standby
time, if the sound returns to exceed 60dB, the UNOTEC Gartner will
start recording again.
Turn Off
Press the Power button for 3 seconds to turn off the video camera.
Auto - Off
The video camera will turn off and save the videos in the following cases:
If while recording the battery is low, it will save the video and turns itself
off. If the memory card is full, light flashes, current video is saved and
then it turns off. If there is no recording for 45 seconds, it will turn itself
off in order to save battery.
How to read the recorded files
Insert the MicroSD card into the card reader (included) Connect the
MicroSD card reader included to an USB port in a PC. Copy the files
in your computer.
Webcam Function
Connect the UNOTEC Gartner to a computer using the USB cable. The
operating system should recognize the UNOTEC Gartner as a webcam.
If not, try another cable or USB port. When installation is complete, you
can use the UNOTEC Gartner as a webcam with an appropriate pro-
gram (Skype or any video editor)
Reset
In case of incorrect operation or a system error, reset the device by
pressing the Reset button with the tip of a clip.
ENGLISH
3
