Gemini DJ GMX Manual De Instrucciones página 4

C O N N E C T I O N S
M A s t E r o u t p u t - Plug one end of the XLR or RCA cables into the MASTER OUTPUT
(D) on the rear panel. Plug the other end of the XLR or RCA connectors into any available
inputs on your mixer or PA system.
B o o t H o u t p u t - Plug one end of the RCA cables into the BOOTH OUTPUT (E) on
the rear panel. Plug the other end of the RCA connectors into any available line input on
your mixer or monitors.
u s B o u t - Plug in the USB cable into the USB OUT (B) on the rear panel. Plug the other
end of the USB cable into any available USB port on your computer. This will enable you to
use the GMX in MIDI mode.
u s B t H r u / H u B - Plug a USB cable into the USB THRU/HUB (C) in order to connect
additional USB controllers or devices to your computer.
u s B M E M o r Y d E V i c E i n p u t -
Plug in a USB MEMORY DEVICE on the top center
panel (H). Upon loading the device, the LCD Display will show the folders and tracks on the
USB memory device.
H E A d p H o n E o u t p u t -
The GMX contains a 1/8" HEADPHONE OUTPUT (G) allowing
cueing of music before playback through the master outputs.
M i c i n p u t - Plug a 1/4" cable into the MIC INPUT (F) to input a microphone or auxiliary
source into the mix.
P L AY B A C K C O N T R O L S
B R O W S I N G T R A C K S / F O L D E R S - Rotating the BROWSE rotary encoder (17) aides in
searching for files and folders on the USB Memory Device or within your DJ software.
To open a folder, highlight a folder and press in the BROWSE rotary encoder to select. To
load a track, highlight a track and push BROWSE buttons. To return to the previous folder,
press the BACK button.
P L AY/ PA U S E -
Pressing PLAY/PAUSE (2) will begin playback of the selected track.
Pressing PLAY/PAUSE again will pause playback and hold the track at the current position.
C U E - While the unit is in playback, press PLAY/PAUSE (2) to pause the track. While the
track is paused, press CUE (3) to set the cue point at the current position. The CUE
indicator illuminates when the CUE point is set. Pressing CUE again will take you to the cue
point and pause the track.
J O G W H E E L C O N T R O L -
Pressing SCRATCH (6) enables the Jog Wheel to operate in
SCRATCH mode. Pressing SEARCH (7) enables the Jog Wheel to search through the track
in the desired direction (forward/reverse).
R E V E R S E -
Pressing REVERSE (5) will begin playback in the reverse direction.
P I T C H FA D E R -
Moving the PITCH CONTROL FADER (9) will accelerate the
pitch/tempo when moved towards [+] and deaccellerate the pitch/tempo when it is moved
towards [-]. Holding SHIFT (19) and pressing the RANGE (10) button adjusts the range of
the PITCH CONTROL FADER.
K E Y L O C K - KEY LOCK (10) allows tempo adjustment using the PITCH FADER () without
changing the original pitch. While KEY LOCK is on holding SHIFT (19) and pressing RANGE
(10) will allow you to set the range of tempo adjustment available.
R E P E AT - To repeat a track press REPEAT (14). If it is illuminated the track will repeat
from it's beginning or its cue point upon completion.
4
W W W. G E M I N I S O U N D . C O M