Environment Protection; Declaration Of Conformity - Roney Power MATKAP 550 W Manual De Instrucciones

standstill
● Use completely unrolled and safe extension cords with a capacity of 16 Amps (UK 13 Amps)
● In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect the plug
● RONEY POWER can assure fl awless functioning of the tool only when original accessories are used
● Use only accessories with an allowable speed matching at least the highest no-load speed of the tool
● This tool should not be used by people under the age of 16 years
● Be careful not to drill or drive into areas where electrical wires may be contacted
● If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect the
plug
● Never use tool when cord is damaged; have it replaced by a qualified person
● Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool (tools
with a rating of 230V or 240V can also be connected to a 220V supply)
● If the drill bit becomes unexpectedly jammed (causing a sudden, dangerous reaction), immediately switch
off the tool
● Be aware of the forces that occur as a result of jamming (especially when drilling metals); always hold the
tool firmly with both hands and take a secure stance
● Always disconnect plug from power source before making any adjustment or changing any accessory
● Holding the tool
- keep the ventilation slots uncovered
- do not apply too much pressure on the tool; let the tool do the work for you
Your machine is double insulated in accordance with EN60745; therefore no earthwire is required.
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly
clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust
and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as
petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
The machine requires no additional lubrication.
If a fault occur, e.g. after wear of a part, please contact your local dealer's service.

ENVIRONMENT PROTECTION

In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these materials to the appropriate recycling locations. Take
your unwanted machines to your local dealer. Here they will be disposed of in an environmentally safe way.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste!
Please actively support us in conserving resources and protecting the environment by returning this
appliance to the collection centres (if available).
We declare under our sole responsibility that this product is in conformity with the following standards or
standardizeddocuments:EN60745-1:2009+A11:2010;EN60745-2-1:2010;EN55014-1:2006/+A1:2009;EN55014
-2:1997/+A1:2001/A2:2008; EN61000-3-2:2006+A1:2009/+A2:2009; EN61000-3-3:2008; in accordance with
the regulations 2006/42/ЕEС, 2006/95/ЕEС, 2004/108/ЕEС.
NOISE/VIBRATION Measured in accordance with EN60745 the sound pressure level of this tool is <88 dB(A)
and the sound power level is <99dB(A) (standard deviation: 3 dB), and the vibration is <7,33 m/s
handle).

DECLARATION OF CONFORMITY

2
( main
5