Tripp-Lite B127A-1A1-BHBH Manual Del Propietário página 17

Standard Extender Kit Installation
1.
2.
3.
4.
5.
6.
-10-008-933D27-Book.indb 17 -10-008-933D27-Book.indb 17
Make sure all equipment in the installation—such as TVs,
Blu-ray players and the transmutter—is powered OFF.
Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
or P568-XXX-2A Series cables), connect the HDMI source to
the INPUT port on the local transmitter unit.
Optional for B127A-111-BHTH: Using an HDMI 2.0 cable
(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series
cables), connect a local monitor to the LOCALOUT port on
the B127A-111-BHTH local transmitter unit.
Using Cat6 cable, connect the RJ45 port on the local
transmitter unit to the RJ45 port on the remote receiver unit.
Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
or P568-XXX-2A Series cables), connect the remote receiver
or transceiver unit's HDMI port to a monitor.
Turn on the power to your connected TVs/monitors. The
LOCAL (orange) LED will illuminate to indicate the local port
has been connected to a display.
17
4/21/2021 4:00:30 PM 4/21/2021 4:00:30 PM