HIKVISION UD24041B Guia De Inicio Rapido página 11

Maintenance
● Clean the lens with soft and dry cloth or wiping paper to avoid
scratching it.
● Wipe the device gently with a clean cloth and a small quantity of
ethanol, if necessary.
● If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
● If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the device may be impaired.
Using Environment
● DO NOT expose the device to extremely hot, cold, dusty, corrosive,
saline-alkali, or damp environments. Make sure the running
environment meets the requirement of the device. The operating
temperature shall be -30 °C to 55 °C (-22 °F to 131 °F), and the operating
humidity shall be 95% or less.This device can only be safely used in the
region below 2000 meters above the sea level.
● This device can only be safely used in the region below 2000 meters
above the sea level.
● Avoid equipment installation on vibratory surface or places subject to
shock (neglect may cause equipment damage).
● Do not aim the lens at the sun or any other bright light.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off
the power, unplug the power cable, and contact the service center.
Manufacture Address
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Hangzhou Hikvision Digital Technology Co.,Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to
export controls in various countries or regions, including without
limitation, the United States, European Union, United Kingdom and/or
9