AGP SB9 Instrucciones De Seguridad página 9

TO INSTALL THE VACUUM CLEANER HOSE
1.
Unplug the machine.
2. Plug the vacuum cleaner hose bayonet mount into the swivel mount
in the back of the machine. Once the tangs of the bayonet mount
are fully inserted in the slots, hold the swivel mount from turning
and turn the hose bayonet mount clockwise to lock.
3. Removal is the opposite of assembly.
THE VACUUM CLEANER
Ensure that you have a bag installed in your vacuum cleaner which is approved and rated for drywall dust.
WARNING: Failure to use an approved dust bag in your vacuum will increase the level of airborne dust in
the work area. Prolonged exposure to such dust may cause respiratory harm.
STARTING AND STOPPING TOOL
Make sure that the power circuit voltage is the same as that shown on the specification plate of the machine
before connecting the tool to the power circuit.
Switching the machine on and off
To switch on:
While holding with the left hand on the column and the right hand
on the main handle, first press the Power Button to energize the tool,
then press the Motor On/Off button to start the tool. Anticipate and
be ready for the start up torque when the machine first starts.
To switch off:
Press the Power Button. After the machine has been switched off, the
sanding disc will still rotate for a time. Take care that parts of your
body do not come into contact with the disc and do not set the
machine down while it is still rotating!
ADJUSTING THE ROTATION SPEED
The speed of the machine is variable to suit different tasks. It can be
adjusted from 780/min up to 1250/min in steps of 80/min by pressing
the "Up" and "Down" Speed Selector Buttons. Press "Up" to increase
the speed and "Down" to decrease the speed. The selected setting
will appear on the indicator screen.
GB
Indicator Screen
(1) Power Button
Speed Selector
Buttons
(2) Motor On/Off Button
9