Troubleshooting Tips - Hotpoint RVM5160 El Manual Del Propietario

Troubleshooting Tips

Problem
Oven will not start
Control panel lighted, yet
oven will not start
"LOCKED" appears on
display
Floor of the oven is warm
even when the oven has
not been used
You hear an unusual low-
tone beep
Vent fan comes on
automatically
SENSOR ERROR appears
on the display
49-7000116 Rev. 0
Possible Causes
A fuse in your home may be blown or
the circuit breaker tripped.
Power surge.
Plug not fully inserted into wall outlet.
Door not securely closed.
Door not securely closed
Start/Pause button not pressed after
entering cooking selection.
Another selection entered already in
oven and Cancel/Off button not pressed
to cancel it.
Cooking time not entered after pressing
Cook Time
Cancel/Off was pressed accidentally
Food weight not entered after selecting
Weight Defrost or Time Defrost
The control has been locked.
The cooktop light is located below the
oven floor. When light is on, the heat it
produces may make the oven floor get
warm.
You have tried to change the power
level when it is not allowed.
The vent fan automatically turns on
to protect the microwave if it senses
too much heat rising from the cooktop
below.
When using a Sensor feature, the door
was opened before steam could be
detected.
Steam was not detected in a maximum
amount of time.
What To Do