Height Adjustment - Drive RTL10555BL Manual De Instrucciones

9. Press the red release buttons (G)
for handgrips, as shown in Figure
9, and pull the handgrip upwards
at the same time. As the handle
moves, release the button. This
automatically locks in the next
possible height. Repeat this
process until the desired height is
reached.
10. Pull both brake levers upwards to apply the
brakes while the I-Walker is moving.
(Figure 10) Always brake slowly and steady.
Press both brake levers down to apply the
locks while the I-Walker is stationary. (Figure
11) Pull up the brake levers and release to
release the locks.
The effect of the brakes can be affected by
abrasion of the wheels.
Regularly test the brakes.
Rev.1.07.21.14

height adjustment

braking / locking
G
Figure 9
Figure 10
Figure 11