ACME IP1101 Manual De Usuario página 6

3.1
A. Click "Setup camera" if you are setting the
camera for the first time.
B. Make sure that the camera is ready to
be paired and the blue LED indicator is
rapidly flashing, otherwise perform a reset
operation.
C. The name of the current Wi-Fi network will
be shown. Enter the Wi-Fi password or leave
it blank if there is none, then tap „Next".
D. Your mobile device will start to emit a sound
signal for the pairing procedure. Adjust
the volume to a medium level and keep
the mobile device near the camera as it is
connecting to the Wi-Fi network.
E. If your camera fails to connect to the Wi-Fi
network, reset the camera and repeat all the
steps.
F. After successful connection, you will be
prompted to create a name and a password
for your camera and select the direction of
the camera lens. The password must have at
least 8 characters and include an uppercase
letter, a lower case letter and a number.
3.2
A. Tap "Reconnect" to connect the camera that
has already been set up. (Make sure that the
camera is connected to the Wi-Fi network –
the LED is solid blue.)
B. Scan the QR code on the Wi-Fi cam or search
for it via Wi-Fi.
C. Enter the password that was created during
the first setup of the camera.
Requirements for the Wi-Fi network
• Make sure that your device is connected to a 2.4 GHz Wi-Fi network. A 5 GHz
Wi-Fi network is not supported.
• Make sure that the camera is within the range of the Wi-Fi network and has
a strong signal.
• Make sure that your wireless router/access point or the network provider is
not blocking P2P (peer to peer) networking.
Overview of the application
Main screen
i
For iOS users: swipe left to remove the camera and swipe down to
refresh the video stream.
6
Camera list
Refresh camera feed, edit list
or remove a camera
Tap the preview screen to
view the live camera stream