Resetting The Camera; Setting Up The Camera - ACME IP1101 Manual De Usuario

Resetting the camera

The camera must be reset when pairing for the first time, changing a user
account or a Wi-Fi network.
1. Insert the reset pin into the reset button hole.
2. Press and hold the pin for at least 5 seconds until the indicating voice is
heard.
3. Wait for the camera to reboot and for the blue LED indicator on the front
to start rapidly blinking – the voice from the camera will indicate that the
camera is ready to be paired.

Setting up the camera

1. Plug the micro USB cable to the micro USB port on the back of the camera.
2. Plug the supplied power adapter into a wall outlet.
3. Reset the camera (if required).
4. Wait about 30 seconds for the camera to boot up.
5. The camera is ready to be paired.
Setting up the application and pairing
1. Open App Store (for iOS) or Google Play Store (for Android) on your mobile
device. Search for GuardVR, then download and install it to your device.
Please accept all security requests when installing and launching the
application, otherwise the application may not work properly.
QR codes for quick download:
For iOS devices
2. Make sure that the mobile device is
connected to the Wi-Fi network, launch the
application and tap "Add a camera".
For Android devices
5