Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Getting Started
System maintenance
The system requires no speciic maintenance beyond battery replace-
ment for the remote controls. The 2-way remote control is powered by
a 1.5V AAA battery. The LCD displays a battery level indicator which
has three bars indicating the current charge level of the battery. When
the battery reaches a low charge level that requires replacement, the
remote control generates a single notiication sound, and the battery
level indicator lashes continuously.
Your 1-way remote control is powered by a coin cell battery (CR-2032)
that can be purchased at most retailers. The operating range diminishes
as the battery weakens.
Battery Replacement
Gently slide the battery cover release tab to unlatch the battery com-
partment (located on back of remote control), then slide the door down
to expose the battery and remove the expired battery. Place the new
battery into the remote verifying the correct polarity. When power is re-
turned, all LCD icons are displayed, and the remote plays a melody.
1-way battery replacement
Locate the small slot on the side of the remote control. Insert a small
slotted screwdriver or equivalent tool into slot and pry the case apart.
Replace battery while verifying the correct polarity and then snap case
together.
© 2010 Directed Electronics. All rights reserved.
3
Capítulos
Tabla de contenido
