Water2Buy W2B180 Manual Del Usuario página 7

2A
(A) Locate the waste fitting on the
control valve. Using 15mm tubing,
2
connect the waste fitting on the
control valve to a suitable drain
outside the building.
Secure the waste tubing with a
jubilee clip. Make sure the red
fastener on the waste fitting is
securely in place.
(B)
Using 15mm tubing connect
the overflow to a suitable
drainage location outside. Secure
the overflow tubing with a jubilee
clip.
The overflow and the waste pipe
should not be joined together.
(C)
Connect the mains water pipe
to the water inlet on the control
valve.
It's important that you check the
water directional flow arrows on
your unit.
7