Recalling Measurements In Memory - MABIS Healthcare 04-790-001 Manual De Instrucciones

Recalling Measurements in Memory

You can recall up to 120 total measurements in memory (60
per memory bank). These measurements can be shared with
your physician or trained healthcare professional.
1. Press and release the MEMORY button. The unit will
display either U1 or U2 depending upon the user bank
selected. It will also show how many measurements are
stored within that bank, Fig. 1 .
2. To select the appropriate user bank press the POWER
button to switch between U1 and U2.
3. Once the desired user memory bank is selected, the
average of the last three readings will be displayed. Press
the MEMORY button again to scroll through the saved
measurements. After youʼve scrolled through all the
readings, the unit will automatically turn off.
NOTE: Each memory bank can store up to 60 readings. When
the number of readings exceeds 60, the oldest data will be
replaced with the new record.
To erase all stored measurements:
1. Press and release the MEMORY button. The unit will display
either U1 or U2 depending upon the user bank selected and
how many measurements are stored within that bank.
2. Select the desired user bank by pressing and releasing the
POWER button.
3. Press and hold down the Memory button until two horizontal
lines flash, Fig. 2 . This indicates that all measurements
within the selected memory bank have been erased.
16
Fig. 1
Fig. 2