PALSON ELEKTRA 30551 Modo De Empleo página 8

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
GB
Our products are developed to the highest standards of quality, functioning and design. We hope you enjoy your new
PALSON ELEKTRA electric sweeper.
Important note:
-
This appliance is authorised for domestic use only!
-
Before using the appliance, check that the voltage indicated on the product is the same as in your home.
-
Do not leave the appliance unattended when the recharger is connected.
-
This appliance is not a toy. Be especially vigilant when children are nearby.
-
Regularly check the appliance, cables and plugs for visible damage. You must not use the appliance if the housing
has been damaged or if you notice any other damage.
-
Never try to change the power cable or open the appliance or the power adaptor yourself. Repairs to the appliance
must always be carried out by an authorised technical service agent. There is considerable risk to the user if
repairs are not carried out by qualified service engineers.
-
Never pull the cable to disconnect the power adaptor from the wall socket. Always pull on the plug.
-
Do not allow the cable from the power adaptor to become trapped. When you use the cable take care to position
the cable so as to avoid the risk of people tripping. Keep the cable away from hot surfaces such as cookers.
-
Do not touch the power adaptor or cable with wet or damp hands.
-
Do not use the appliance outside.
-
Do not use the appliance to clear up inflammable liquids such as fuel or solvents, or very hot objects such as
cigarette ash.
-
Never vacuum up sharp objects such as pieces of glass etc.
-
Do not point the vacuum cleaner at people or animals while it is switched on.
-
Only use the power adaptor on dry surfaces.
-
Only use the accessories supplied with the appliance.
-
Keep these instructions in a safe place.
-
If you give the appliance to someone else give them these instructions as well.
-
When inserting the batteries check that the polarity is correct. Do not short circuit the batteries or throw them into
the fire.
-
Remove the batteries from the appliance if you are not going to use it for a long period of time.
-
The battery should not be taken apart, short circuited, placed on a metal surface or exposed to excessive heat.
-
If the power cable is damaged, it must be replaced by the manufacturer or his authorised technical service agent or
by a qualified technician, so as to avoid any risk.
-
This appliance is not intended for use by people (including children) whose physical, sensorial or mental state
prevents them from using it safely or who lack the necessary experience or knowledge, unless supervised or given
instructions regarding its use by a person responsible for their safety. Children must be supervised to ensure they
do not play with the appliance.
Unpacking and assembly
Check that all the parts are in the box. Parts list – page 5.
-
Attach the upper handle (), inserting it carefully into the main body (4).
-
Attach the swivel brush head (9), inserting it carefully into the main body (4).
-
Place the recharging base (11) near a power socket (away from sources of heat or moisture). Plug the power
adaptor (10) into the power socket and connect it to the recharging base (11).
Charging
-
Place the appliance in the charging base (11) (note: make sure that the appliance is switched off). The indicator
lights will light up once the appliance makes contact with the charging base. The batteries need to be charged
for 8 to 10 hours before using the appliance for the first time. When the battery is completely discharged it will
take between 1 and 16 hours to fully recharge it. To ensure the appliance is always ready for use, it must be left
recharging when not in use. The power adaptor may become warm when in use. This is normal.
-
Maximum operating time: 0 minutes.
Vacuuming floors and carpets
You must regularly check that the accessories for the handheld vacuum (13) and the roller brush head (1) are clean to
avoid scratching the floor.
-
Start the appliance by pushing the I/O (1) button.
-
(I) first position = medium power for longer periods of use.
-
(II) second position = maximum power
8
loading