Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DIGITAL THERMOSTAT OPERATION
CAUTION: Do not use if exposed to environments outside the temperature
range of 32-122
Dual Display
•
PV : Present Value (Measured Pot Temperature)
•
SV : Set Value (Desired Pot Temperature)
LED Indicators
•
Out : Heating element is on and heating Melting Pot
•
AT : Thermostat is adjusting output to ensure the measured Melting Pot
temperature (PV) matches that of the desired Melting Pot temperature (SV)
•
AL : Illuminates to alert user when PV temperature is 30-50
OPERATION
To set desired temperature:
1.
Depress SET button. SV Display will begin to flash.
2.
Use the "
desired Melting Pot temperature.
3.
When desired value is reached use the " " button to move to next value and
V
use "
" and/or "V" buttons to increase or decrease the value.
When the desired temperature is displayed (SV), depress the SET button to
4.
confirm desired temperature and begin heating.
To turn off the unit:
Depress SET button, display will begin to flash.
1.
V
" , " V", and " " buttons to set SV temperature to 0
2.
Use "
Pot heating.
3.
The fan will continue to run to cool unit.
4.
When unit cools down and PV display reads 160
to completely power down unit.
CAUTION: Burn hazard.
Do not touch the unit during or after operation until cooled.
F
o
V
" (increase value) and "V" (decrease value) buttons to set your
F, unplug AC cord from unit
o
8
F higher than SV
o
F, this will turn off
o
Tabla de contenido
