RCBS EASY MELT 2 Instrucciones Del Producto página 5

Develop a reloading routine to avoid mistakes. Avoid haste — load at a leisurely pace.
• Always wear adequate eye protection.
ELECTRICAL WARNINGS
WARNING: CARE SHOULD BE USED WHEN OPERATING ELECTRICAL APPLIANCES
IN WET AREAS OR AROUND WATER. OPERATING UNIT ON A GFCI OUTLET WITH A
RATED TRIP CURRENT OF 30mA IS RECOMMENDED TO PROVIDE PROTECTION AGAINST
ELECTRIC SHOCK. THE INSTALLATION OF A GFCI CIRCUIT SHOULD ONLY BE CARRIED
OUT BY A QUALIFIED ELECTRICIAN.
CAUTION: Leave the unit unplugged until you have read all the instructions and are
ready to use.
• This product is equipped with a three wire, detachable power cord; plug only into a proper
outlet.
• Do not work on wet floors.
• Do not plug into electrical outlet until the proper voltage is supplied.
• Locate all electric cords away from moisture, rain and moving parts.
• Periodically check all cords for worn/frayed spots and replace or repair to code if needed.
• Never submerge unit in water or any other liquid in an attempt to clean the unit.
• Never use unit if power cord becomes damaged.
• Never attempt to disassemble unit.
• Always use on a flat level surface.
• Always disconnect power cord before adjusting, cleaning, setup, etc.
• Always unplug unit when not in use.
• Allow for adequate room around unit to allow for cooling. Do not store items next to unit
while in use. Keep cooling fans and vents clear of any obstructions (rags, bags, boxes, etc.).
DANGER OF ELECTRIC SHOCK! To prevent life-threatening electric shock, please
observe the following:
• Do not use while bathing.
• Never immerse the device or power cord in water or other liquid.
• Never touch the power plug with wet hands, especially when inserting or removing the plug.
• If the unit has fallen in water during operation, do not touch the unit. Remove the power
plug from the socket first.
• Do not spray water or liquid over the device.
• When removing the cord from the socket, grab the power plug, not the cord.
• Protect the power cord from damage.
• If there is damage to the power plug, cord, housing, or other parts of the device, do not use.
• Disassembly of this device should only be performed by qualified professionals at RCBS.
CASTING
Overexposure to lead can be harmful. Lead contributes to health impairment and diseases
which occur after periods of lead exposure over long periods of time.
• Bullet casting should not be conducted in a confined space or in an enclosed room. Ensure
that well-ventilated areas are used to avoid build-up and breathing of lead dust, fumes and
fluxing fumes. Good ventilation includes continuous cross-ventilation by large amounts of
fresh air.
• Particulate masks should be worn during bullet casting activities.
• When casting or otherwise working with molten lead, always wear effective eye protection,
appropriate protective clothing, leather or thick cotton work gloves, and shoes that cover
5