Troubleshooting - Beko STM 4116 B Manual Del Usuario

4 Troubleshooting

Problem
The steamer does not heat up
The steamer does not produce steam
Water spills from the water tank
The steamer is producing a loud humming
or pumping sound
The steamer does not seem to be remov-
ing creases easily
Unsure when to use the brush
Avoiding discoloring of metal accessories
on the garment
Garment Steamer / User Manual
Possible solution
• Check main plug is inserted correctly.
• Check power supply.
• Check power button.
• Check the water level and the water tank
inlet cover is properly covered.
• Press the steam activation button harder.
• Hold the steamer in an upright position.
• Make sure water is not over the MAXI-
MUM level.
• Make sure water tank inlet cover is prop-
erly closed.
• Check water level; if there is no water or
it is low , refill the water tank.
• Hold the steamer in an upright position
and stretch the fabric downward to en-
sure best results.
• Use net brush on delicate fabrics and
fabric brush on other subjects for better
results.
• Do not directly hover the garment steam-
er over the metal accessories.
• Be cautious and steam around the metal
accessories.
17 / EN