Using The Appliance; Cleaning; Technical Data - ProfiCare PC-DR 3098 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20

Using the Appliance

WARNING: Risk of scalding!
Keep the appliance straight. Tilting the appliance by more
than 45 ° can cause hot water to leak from the appliance.
CAUTION:
Before you begin cleaning you should test the materials to
be cleaned as to their suitability for cleaning with steam.
Do not hold the steam nozzle for too long and too close in
one position.
• When the plug is connected to a wall socket, the water
in the boiler starts heating up. The heating control lamp
lights up.
• Pressure starts building up in the boiler after approx.
3 – 4 minutes. When the appliance is ready for use, the
control lamp turns off.
• Unlock the lock by pushing it to ON and holding it there.
Then press down the steam button to generate pressure.
NOTE:
Using the appliance with the maximum water amount and
in continuous operation will allow for steam generation of
up to 10 minutes.
WARNING:
• Always remove the mains plug before cleaning the appliance.
• Wait until the appliance has cooled down.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Before the appliance is put away or cleaned it must have
completely cooled down.
• Clean the appliance and accessories with a slightly
damp cloth.
• The fleece cloth can be machine-washed at 60 °C. Do
not dry in a tumble dryer.
• Regularly remove lime deposit from the boiler in order to
ensure a long service life for the appliance. When doing
so, use clean water without any additives.
PC-DR3098_IM
Filling the Water Tank during Operation
No steam will be discharged if the water tank is empty. The
water has to be filled up as follows:
1. Remove the mains plug from the socket!
2. Fill fresh water into the tank as described in the chapter
"Fill in Water" (steps 1 – 7).
3. Connect the mains plug to the wall socket to continue
operation.
When you have finished using the Appliance
1. Remove the mains plug from the socket!
2. Let the appliance cool down completely.
3. Empty the water tank.

Cleaning

Model:................................................................. PC-DR 3098
Power supply:.....................................220 – 240 V~, 50 / 60 Hz
Power consumption: .......................................... 900 – 1050 W
Protection class: ....................................................................
Max. steam capacity: ............................................... 25 g / min
Tank capacity: ................................................. approx. 250 ml
Net weight: ....................................................... approx. 1.4 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibility

Technical Data

24.03.21
33
Tabla de contenido
loading

Tabla de contenido