Important notes
Ankle orthosis soft
Dear user,
We are pleased that you have chosen a product from
Ofa Bamberg and would like to thank you for putting
your trust in us. Please take a moment to read through
this product information carefully to ensure optimum
effectiveness of your Dynamics product.
Ofa Bamberg wishes you a speedy recovery!
←
Fitting instructions
The fi tting instructions in pictures can be found on the
fold-over page at the beginning of the brochure.
1
To put on the orthosis, open the two wide Velcro tapes and place
your foot on the heel band. Place the shells against the ankle and
the leg and check the setting of the heel band. If this has been
correctly adjusted, the heel band and the shells should be lying
flush but not too firmly.
2
If necessary, correct the width of the heel band via the Velcro
fasteners at the shells.
3
Now hold the orthosis against your leg with one hand. First wrap
the lower Velcro tape fi rmly around the shells and fasten it. Then
fasten the upper Velcro tape in the same way. The tapes can
then, if necessary, be re-adjusted. Please ensure that the product
is secure but not too tight in order to prevent pinching.
The Dynamics ankle orthosis
soft provides effective stabilisa-
tion for the ankle. The anatom-
ically contoured shells prevent
lateral ankle sprain. The soft inner
memory foam padding conforms
to the ankle in an optimum way
and offers enhanced wearing
comfort.
Please note
– The initial adjustment and strapping on
of the product must be carried out by
qualifi ed specialist staff.
– Wear the product over a knee stocking,
and ideally always in a lace-up shoe,
which will provide optimum stabilisa-
tion. If the product has to be worn in
combination with other products, then
please discuss this in advance with
your doctor.
– If you experience an unpleasant sensa-
tion, intense pain or any other problem
when wearing the product, then con-
tact your doctor or specialist supplier
immediately.
– We use a comprehensive quality man-
agement system to check our products.
However, should there still be reasons
for complaint, please contact your spe-
cialist supplier.