Maintenance; Safety Chain Hangers - Reese 94716 Instrucciones De Instalación

To ensure long term performance, it is recommended to follow the following maintenance:
1. Grease coupler shaft from fitting in back of coupler before each use and clean and then grease the
Gooseball (Figure 17).
2. Inspect the Goosebox for any damage or excessive wear.
3. Once per season, fully deflate the airbag and then refill.
4. No special instructions for storage, but perform normal maintenance when taking out of storage
and using again.
BEFORE EACH TRIP:
. CHECK YOUR EQUIPMENT: Check that condition of all of your towing equipment and keep it in top
5
condition.
6. Check to see that all bolts and nuts are properly tightened.
7. Check that the airbag pressure is set for your vehicle and loaded trailer (Note that the airbag can loose
pressure with temperature changes when not in use).
8. Check the functionally of the coupler pull handle to make sure it moves in both the locked and unlocked
positions.
For added levels of safety, please use the Reese 20K Rated Safety Chain (part number 49151),
For the 16K Goosebox(94716), 16k Rated Safety Chain (49150) can be used.
When not in use, put the safety chain hooks into the supplied safety chain holes for proper storage.
Figure 18
©
2018 Horizon Global America Inc.
Installation Instructions

Maintenance

Figure 17

Safety Chain Hangers

Goosebox
Safety Chain Hanger Location
Page 8 of 10
Part Number(s):
94716, 94720
Grease Fitting
94720IN 9/25/18 Rev. B