PROTEOR DynaStar 1A500 Instrucciones De Montaje página 4

5- Finishing: To avoid rubbing noises, pull the sock up to the ankle connector or the basis of the pyramid and f ix it with
a f ine string for example.
The malleolar clips shown in the following table ensure connection to the cosmetic foam and allow to dismantle the foot
easily and rapidly.
Installation : Cut the cosmetic foam to the desired length, position the foam on the foot and draw the malleolus contour.
Inside the foam mill a space that will receive the selected connecting part and the foot part protruding f rom the shell,
and at the same time take care that thickness be sufficient to allow for sticking. Position the malleolar clip caref ully and
clip it into the cosmetic foam. Clean contact surf aces with isopropyl alcohol and stick the malleolar clip on the foam
with XC090 neoprene adhesive. After drying, finish the outer shape as usually.
6- Maintenance
The cosmetic shell, the sock and the malleolar clip are the only foot components that may be
worn out and may need to be replaced.
The cosmetic shell can be removed and installed again using 1A40019 shoe-horn.
Use exclusively the spare cosmesis 1A40020-D22
malleolar clip.
7– Recycling
The different components of the foot are special wastes and must be treated accordingly.
Part for the patient
Clean the cosmetic cover with a slightly damp cloth or sponge.
Use temperature : - 20°C / +60 °C.
Do not let foreign bodies or dust inside the foot.
If the foot has been dipped or sprinkled, empty the remaining liquid and dry the foot rapidly.
A use of the foot that does not adhere to your prosthetist's recommendations can damage foot components.
In case of an abnormal behaviour of your foot, or changes in your foot f eatures, or if the foot sustained a hard
shock, contact your prosthetist.
Foot size (cm) 22 to 25
Product Nr 1A40013 1A40014 1A40015
including the cosmesis, the sock and the
Side Size in cm
ADVICE FOR USE, MAINTENANCE AND SAFETY
26 to 27 28 to 29
6 rue de la Redoute - 21850 Saint-Apollinaire - France
Tél. 33 (0) 3 80 78 42 10 - Fax 33 (0) 3 80 78 42 15
[email protected] - www.proteor.com
1A50099-05117- Page 4/8
1A40019
PROTEOR