Delco DCV2420 Manual De Instrucciones página 9

Connect Garden
1
hose to Pump
Thread the
garden hose to
the pump inlet.
See Label #1 on the
front of the unit.
Connect Spray
4
Wand to Spray
Gun
Thread the spray
wand into the end
of the spray gun.
Release Air
7
from System
Release all
air from pump and
high pressure hose by
depressing trigger until a
steady stream of water is
present. Approximately
30 seconds.
Connect high
2
Pressure hose
to Pump
Thread the high pressure
hose to the pump outlet.
See Label #2 on the
front of the unit.
Connect QC
5
Nozzles to Spray
Wand
Pull quick connect
coupler back and insert
nozzle. Release quick
connect coupler and
twist nozzle to make sure
it is secure in coupler.
Verify the fuel
8
Valve is turned
to the OPEN
Position
The Fuel Valve has been
preset by the factory to
be in the OPEN position.
See Label #8 on the
side of the engine.
9 - ENG
Connect high
3
Pressure hose
to Spray Gun
Thread the other end
of the high pressure
hose to the spray gun.
Turn Water
6
faucet
Completely On
Do not run the unit
without water supply
connected and turned
on. Use Cold Water Only.
Verify the Choke
9
Pin is Pushed In
to the CLOSED
Position
The Choke Pin has
been preset by the
factory to be in the
CLOSED Position.
See Label #9 on the
front of the unit.