Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SAFETY PRECAUTIONS:
• The bath tub wall, both inside and out, should be clean of soap or waxy
residues and free of any obstructions. This is essential if the clamping action
is to work correctly.
• Ensure all surfaces and clamping pads are dry and free of soapy residue.
Clean and dry before each installation.
• On certain types of tub surfaces (i.e. fiberglass or thin steel tubs), use extreme
care not to over tighten the knob. If the knob is over tightened, the clamp may
crack the tub.
√ The flat surface of the base of the tub grab bar should rest directly on the
top of the tub wall. If a shower doortrack interferes with this contact, the unit
should not be installed.
√ Check the tub grab bar for tightness and stability before each use.
√ This product is not made with Dry Natural Rubber.
Installation Instructions:
1. Open the clamp by turning the adjustment knob counter-clockwise.
2. Place the clamp over the sidewall of the tub with adjustment knob positioned
on the outside of tub and secure tightly by turning adjustment knob
clockwise. Improper installation can cause injury when exiting the tub.
Use Instructions:
1. In order to assure the user maintains their balance when using the tub grab
bar, always test for stability by vigorously attempting to lift and move unit
sideways. If unit is clamped correctly, it should be extremely stable and rigid,
even when substantial forces are applied.
2. If the grab bar becomes wet/soapy it may become slippery.
3. The tub's grab bar knob protrudes away from the tub. When entering or
leaving the tub, use care to avoid injury from the protruding knob.
Cleaning:
1. Periodic cleaning of the tub grab bar is recommended. Using soap and water
is the recommended cleaning method for this product. Avoid the use of
harsh cleaners.
2. Dry the tub grab bar after cleaning and before each use.
Maximum User Weight: 113 kg (250 lb)
2 MEDLINE | MDS86321W | PIC-00373 (Rev. 05-15-2019)
Tabla de contenido
