Fermax SMILE VDS BASIC Manual Del Usuario página 9

SMILE VDS
SMILE VDS
Option 1: From Panel + Monitor
When the monitor has not been programmed.
1. Access the ADMINISTRATOR menu. Press "Menu" for 3 seconds.
screen appears
2. The administrator code option is selected
as default (white line under the icon).
Press . The following screen will appear
4. The selected option is displayed on the white line under the icon. Press
appears confi rming the selected option: programming from the panel and you hear a beep
on the monitor.
_ _ _
_ _ _
2222
4444
5. The monitor automatically connects to the street panel, activating the camera (this shows
a panel icon in the upper left corner of the monitor). Enter the calling code for this monitor
from the panel:
- pressing the corresponding button or
- by entering the code + bell.
Panel
1
icon
A different calling tone is produced, confi rming the monitor´s programming, continuing to view
the camera´s image and after a few seconds the monitor returns to the programming screen.
_ _ _
_ _ _
2222
4444
3. In order to select programming from the
panel, select the panel from the VDS # line
with the right arrow.
Notes:
- The time between steps 4 and 5 must be
less than 2 and half minutes.
- Programming is always done from the panel
activated as the main panel.
. The following
, and a screen