Making And Receiving Calls - Walker W425 El Manual Del Propietario

MAKING AND RECEIVING PHONE CALLS
Placing a Phone Call
1. Press the TALK button. (TALK button
will illuminate).
2. Dial the number you wish to call.
3. Adjust the rotary Volume Control to
desired level.
4. Press the Clarity Power Button
(activates the Clarity Power Technology)
to gain the extra level of amplification,
if needed.
Refer to BOOST CLARITY POWER
ON/OFF and BOOST ON/OFF for
additional information on volume controls.
To Dial from Memory
1. Press the TALK button.
2. Press the MEM button.
3. Press the number on the dial pad
where the desired number has been
stored.
4. The call will automatically dial.
5. Adjust volume and Clarity Power as
needed.
To Dial From Emergency Storage Location
1. Press the TALK button.
2. Press the desired emergency button.
3. The call will automatically dial.
4. Adjust volume and Clarity Power as
needed.
Operating Your Telephone
To use a TONE service on a Pulse Line
1. Dial the number you wish to call
2. When the call is answered, press the *
key. Additional numbers you dial are
sent as tone signals.
3. After completing the call, press TALK
or return the handset to the base. The
phone will automatically reset.
Receiving a Call
Handset in Base of Telephone
1. Lift the handset. Do not press
TALK. You will automatically be
connected.
Handset out of Base
1. Press the TALK button.
Ending a Call
Place the handset in the base cradle or
press the TALK button to disconnect the line.
Note: When placing or receiving a call, the
handset visual ringer will lite, indicating the
phone is in use.
E
N
G
L
I
S
H
19