Troubleshooting - Oregon Scientific Weather + EM221 Manual Del Usuario

TROUBLESHOOTING

Problem
+
My Weather is not working.
I cannot pair the Weather
with my smart device.
I cannot retrieve all data from
+
the Weather .
The live data does not refresh
when I press .
When I press , it shows
a circle with percentage
what does it mean?
SPECIFICATION
L x W x H
Weight
Operating range
Weather display
Temperature resolution
RF Transmission Range
Relative Humidity Range
Pressure range
Device memory
App memory
Power
• Make sure the battery is correctly inserted. Follow the pairing instructions
correctly.
• Press
again.
Check if the Weather
+
operation range. Place your smart device closer if there are physical
obstacles such as a thick wall or large pieces of furniture interfering with
the transmission.
+
Weather stores the weather data up to 20 days. If your smart device
disconnects from the Weather
retrieve the data from the last 20 days. Make sure you keep your smart
device connected to the Weather
• It may take a few seconds for the live data to show on the app.
• If you have pressed
• Check if the Weather
operation range. If not, place your smart device closer.
• If you have already installed more than 1 Weather
far as possible from each other to avoid interference.
• It may take several minutes for the smart device to load the existing
weather data history.
,
• The process will be interrupted if you exit from the app. Please wait until
70 x 70 x 20 mm (2.76 x 2.76 x 0.79 in)
58g (2.05 oz)
-20°C – 60°C (-4°F – 140 °F)
Sunny/Partly Cloudy/Cloudy/Rainy/Snowy
0.1°C (0.2°F)
Bluetooth: 30 m (98 ft)
25% to 95%
Barometric: 300-1200 hPa
20-day data logger
Historical data logger (Daily/Weekly/Monthly/Yearly)
2 x UM-4 (AAA)
Solution
to reset the device to default, then pair with the smart device
+
and your smart device are in 30 m (98 ft) Bluetooth
+
for more than 20 days, the app could only
+
in order to receive the data.
once, wait for 15 seconds before pressing again.
+
and your smart device are in 30 m (98 ft) Bluetooth
11
+
, place each device as