Operation; Vacuuming Dry Materials - RIDGID WD1665 Manual Del Usuario

Aspiradora para mojado/seco de 16 galones ee.uu./ 60 litros con soplador desmontable
Ocultar thumbs Ver también para WD1665:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SP6438 16 Gallon
7/26/06

Operation

To reduce the risk of fire or explosion, do not operate this vac in areas with
flammable gases, vapors or explosive dust in the air. Flammable gases or
vapors include but are not limited to; lighter fluid, solvent type cleaners, oil-
base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but
are not limited to; coal, magnesium, grain or gun powder. Do not vacuum
explosive dust, flammable or combustible liquids or hot ashes. Do not use this
vac as a sprayer. To reduce the risk of health hazards from vapors or dusts, do
not vacuum toxic materials.
WARNING: The operation of any
utility vac can result in foreign
objects being blown into the eyes,
which can result in severe eye
damage.
Always
goggles complying with ANSI Z87.1
(or in Canada, CSA Z94.3) shown on
package before starting operation.
Safety Goggles are available at many
local retail stores.
CAUTION: To reduce risk of hearing
damage, wear ear protectors when
using the vac for extended hours or
when using it in a noisy area.
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any way.
NOTE: When using the unit in the
vacuuming mode, always insert the air
diffuser in the exhaust port on the
detachable blower. This breaks up the
direct flow of air and diffuses it.
Familiarize yourself with the accessories
included with the vac. Each accessory may
be used in various ways for vacuuming and
blowing debris. Here is a list of the
accessories and their uses.
Utility Nozzle - General purpose nozzle for
most vacuuming applications.
Wet Nozzle - Used for wet pickup on
smooth surfaces to pick up liquid and dry
the surface in one stroke.
9:38 AM
Page 10
WARNING
Car Nozzle - Dry pickup nozzle for car
interiors and most upholstery cleaning.
Blower Nozzle - Attached to the end of a
hose or directly to the power assembly
wear
safety
concentrates
applications.
Diffuser - Insert in the exhaust of the vac
while vacuuming and the air exiting the
exhaust is "diffused". This breaks up the
air coming out of the exhaust.
Extension Wands - These wands can be
connected
additional length for more reach.
Hose - Provides transfer of vacuum or
blowing capability to work site. Provides
the means of attaching extension wands
and nozzles.
Male To Male Adapter - Use this
accessory to connect the blower nozzle to
the exhaust of the power assembly
Accessory Caddy - Store all the
accessories with your vac.
Caster Feet (Front) - Store accessories
with your vac.
WARNING: To reduce the risk of fire
or electric shock, do not run vac
unattended.

Vacuuming Dry Materials

1. The filter must always be in correct
position at all times to avoid leaks and
possible damage to vac.
2. When using your vac to pick up very fine
dust, it will be necessary for you to
empty the drum and clean the filter at
more frequent intervals to maintain peak
vac performance.
10
the
air
for
blowing
together
and
provides
Tabla de contenido
loading

Tabla de contenido