Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Alert Signals
Warning
Warnings alert you to a possibility of
personal injury.
Caution
Cautions alert you to a possibility of
damage to the equipment.
Note
Notes alert you to pertinent facts and
conditions.
Hot Surface
Hot surfaces alert you to a possibility of
personal injury if you come in contact with
a surface during use or for a period of time
after use.
Safety Information
Your Thermo Scientific Cimarec
Stirring Hot Plate has been designed with function,
reliability, and safety in mind. It is your responsibility to
install it in conformance with local electrical codes. For
safe operation, please pay attention to the alert signals
throughout the manual.
Warning: These products should be used only under the
operating conditions specified in the Operating Manual.
Always use safe laboratory practices and do not leave
the hotplate in operation while unattended as product
functionality or laboratory practice failures could occur
that might lead to uncontrolled or excessive heating of
the top surface. Safety procedures (including, but not
limited to, unplugging when not in use) and response
plans should be put in place to address the worst case
possibility. If an over-temperature failure occurs, the
top surface temperature could rise to the maximum
temperature (300-540°C depending on your model's
specification) and remain at that temperature indefinitely.
Under these conditions, the material being heated on
the surface of the hotplate could reach levels in excess
of the maximum temperature.
This manual contains important operating and
safety information. The user must carefully read and
understand the contents of this manual prior to the use
of this equipment.
Warnings
To avoid electrical shock, always:
1.Use a properly grounded electrical outlet of correct
voltage and current handling capacity.
2.Disconnect from the power supply prior to maintenance
and servicing.
+
Hot Plate, Stirrer or
5
Hide quick links:
Tabla de contenido
