Chauvet Professional OVATION H-55FC Guía De Referencia Rápida página 4

EN
Wireless Operation
In optimal conditions, the Ovation H-55FC can operate up to 300 m (900 ft) away from the W-DMX transmitter. The
W-DMX receiver in the Ovation H-55FC must be paired with the W-DMX transmitter for wireless operation.
Initial Setup
1. Turn the W-DMX transmitter on.
2. Connect the W-DMX transmitter to a DMX controller.
3. Place the Ovation H-55FC within 300 m from the W-DMX transmitter.
4. Disconnect any DMX connection from the Ovation H-55FC.
5. Power the Ovation H-55FC on.
Wireless Configuration
To configure the wireless mode, press and hold the button next to the indicator lights.
Mode Wireless Indicator Light
OFF Green/Red lights off
Green light flashing slowly In Receiving Mode
RECIEVE MODE
Red light flashing slowly Connected to W-DMX transmitter but not receiving signal
Red light flashing quickly Connected to W-DMX transmitter but signal is weak.
W-DMX operation can be interrupted or inhibited by liquid masses between the transmitter and
receiver such as water, snow, or people. For best results, keep the area between the transmitter and
receiver clear of any liquid masses.
Mounting
Before mounting this product, read the
weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps/.
Mounting Diagram
Overhead mounting
3
QUICK REFERENCE GUIDE
Description
Product is off
Red light off Waiting for wireless connection
Red light on Receiving DMX input from W-DMX transmitter
Safety Notes. Make sure the mounting clamps are capable of supporting the
Mounting clamps
Safety cable
Pendant mounting
Safety cable Sconce kit
Side/wall mounting
Ovation H-55FC QRG Rev. 3