Taurus Alpatec BOREAL 12 LEGEND Manual Del Usuario página 6

ENGLISH
Desk Fan
BOREAL 12 LEGEND
DESCRIPTION
A Front grill
B Security screw
C Blades
D Grill fixing screws
E Rear grill
F Carry handle
G Motor shaft
H Speed selector
I Oscillation knob
J Motor housing
K Base
L Base fixing screw
M Blades fixing screw
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Fully extend the appliance's power cable before
each use.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Use the appliance handle/s, to catch it or move
it.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Make sure that dust, dirt or other foreign ob-
jects do not block the fan grill on the appliance.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the fan is switched off from the
supply mains before start any installation or
assembly operation.
- The plug must be easily accessible so it can be
disconnected in an emergency.
ASSEMBLING THE BASE:
- To fix the base into the appliance, place the
appliance face down.
- Fit the base on the main body of the appliance.
- Fix the base using the screw provided (Fig.1).
- Stand the appliance up again so as to check
that the base works properly.
ASSEMBLING THE GRILL AND THE
PROPELLER:
- Fit the rear grill (E) on the motor housing (J),
matching their fitting points.
- Tight the screws (D) to fix the grill, make sure it
has a correct setting.
- Fit the blades (C) on the motor shaft (G) and fix
them trough the blades fixing screw (M).
- Fit the front grill (A) front the rear grill (E),
matching the security screw position. Fix the
front grill by using the hooks and tight the secu-
rity screw (B) by using a screwdriver.
- Check the correct rotation of the propeller.
INSTRUCTIONS FOR USE
USE:
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using one of the
speed selection buttons.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, turn the knob (I).
- To deactivate this function, follow the proce-
dure for switching it on in reverse.