Low Voltage Protection - Indel Webasto Marine Isotherm Cruise Classic Instrucciones Para La Instalación Y El Uso

condensation that may have formed, both inside the unit and in the external water
collection tray. The natural defrosting time can vary from a few minutes to several
hours. In the wintertime and when the refrigerator is shut off, the door should be left
slightly ajar for ventilation and all power disconnected.
Classic model ventilation:
Classic models are equipped with a handle with special stopper designed to leave the
door in position for ventilation.
To set the door in the ventilation position, use a knife or coin to release the stopper
(Fig. 5). Once the stopper has been released, hook the door in the ventilation
position.
Elegance model ventilation:
Elegance models are equipped with a special door stopper system to set the door in
the ventilation position inserted in the top of the refrigerator.
To set the door in ventilation position, push the door stopper toward the right to the
ventilation position "--> TO VENT" (Fig. 6).

3.1 Low voltage protection

In order to prevent excessive battery depletion, a protection device shuts off the
compressor in case of insufficient voltage and turns it back on when the voltage in
the system increases after the batteries have been charged.
System Voltage
12V
24V
If the bridge is removed between C and P, the values indicated in the parentheses are
valid.
WARNINGS: Before switching on the unit, always make sure that the
batteries are in optimal condition.
44
Shut-down Minimum Operating
Voltage Voltage
9.6 (10.4) V 10.9 (11.7) V
21.3 (22.8) V 22.7 (24.2) V
User Manual