GE GFXP1308FWW Instrucciones De Instalación

Installation
Instructions
Pedestal
Instructions en français : . . . . . . . . . .. . . . . .5
Instrucciones en español: . . . . . . . . . . . . . . .9
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
•
inspector's use.
IMPORTANT
•
ordinances.
• Note to Consumer – Keep these instructions for future
reference.
• Completion time – 1 to 2 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty
CAUTION
of these products, and to reduce the risk of
PEOPLE ARE REQUIRED FOR PROPER INSTALLATION.
• See washer and dryer Owner's Manual & Installation
Instructions for additional installation requirements and
guidelines.
KIT CONTENTS
4 Mounting screws -
Dryer
4 Mounting bolts -
Washer
31-16708-1
11-13 GE
– Save these instructions for local
– Observe all governing codes and
.
Drawer divider
White Pedestal: GFXP1308FWW
Red Pedestal: GFXP1308FRR
Metallic Carbon Pedestal: GFXP1308FMC
For Washer Models:
GFWS2500, GFWS2505, GFWS2600, GFWS2605,
GHWS3600, GHWS3605, GFWS3700 and GFWS3705
For Dryer Models:
GFDS250, GFDS255, GFDS260, GFDS265, GHDS360,
GHDS365, GFDS370 and GFDS375
TOOLS YOU WILL NEED
Phillips-head
screwdriver
9/16" socket wrench
INSTALLATION PREPARATION
Remove the packaging.
Flatten the product carton to use as a pad to lay
the washer or dryer down on its side. Continue using
the carton to protect the finished floor in front of the
installation location.
1 REMOVE THE LEVELING LEGS
Carefully lay down the appliance to access A
the leveling legs on its bottom. The washer
shipping bolts must remain in place until the
washer is returned to an upright position.
Washer – Lay on its back
Dryer – Lay on its side
Use an adjustable wrench to remove the
B
washer or dryer leveling legs.
1
8 mm socket wrench
10" Adjustable
wrench
Printed in the United States