DeLonghi DBL650 Manual Del Usuario página 18

into underside of the lid where the filler
cap (D) is located.
• The filter has two sieve sizes to filter out
any fibrous or unprocessed ingredients
when pouring.
• Turn the filler cap (D) to change the sieve
size selected over the spout area (3).
6. Fit and lock the lid by turning clockwise (4) -
ensure that the arrow on the lid lines up with
the line marked on the carafe. The blender
will not operate if the lid is not fitted or not
locked
7. Place the blender onto the power unit and
turn clockwise to lock (5).
8. Select the required program or speed and
the button will light up.
Choose from the following options:
• Select one of the 5 pre-programmed but-
tons. The blender will switch off automati-
cally at the end of the pre-set time. If you
wish to stop before the pre-set time, press
the same button again or press the off
button.
• Select one of the manual speed options -
HIGH (III), MEDIUM (II) or LOW Speed (I).
At the end of blending press the OFF "0"
button.
• Pulse button - operates the motor in a
start/stop action. The pulse will operate
for as long as the button is held down.
Blade unit incorrectly
fitted
OPTIONAL MINI CHOPPER / MILL
ACCESSORY
Good for chopping smaller portions quickly
for the best consistency.
600W rating is achieved with this optional
18
correctly.
Blade unit correctly
fitted
Mini Chopper / Mill accessory
1 Put your ingredients into the jar. Fill it no
more than half full.
2 Make sure the sealing ring is correctly fit-
ting on the blade unit.
3 Turn the blade unit upside down. Lower it
into the jar, blades down.
4 Screw the blade unit onto the jar until the
arrow on the side of the blade unit match-
es the line located on the side of the jar.
5 Place the mill onto the power unit and turn
clockwise to lock.
6 Press pulse or select a speed to begin chop-
ping. At the end of chopping, press the OFF
"0" button.
7 After chopping, turn mill upside down and
remove blade unit by turning it counter-
clockwise.
8 Clean as described for the blender carafe.
IMPORTANT
• The maximum power rating is based on
the optional mill accessory.
• To ensure long life of your blender, never
run it for longer than 60 seconds. Switch
off as soon as you've got the right consis-
tency.
• Don't process spices – they may damage
the plastic.
• The machine won't work if the blender is
fitted incorrectly.
• Don't put dry ingredients into the blender
before switching on. If necessary, cut them
into pieces; remove the filler cap; then,
with the machine running, drop them
through one by one. Keep your hand over
the opening. Empty regularly.
• Don't use the blender as a storage con-
tainer. Keep it empty before and after use.
• Never blend more than 54 oz (1.6L) or
more than 27 oz (800ml) for frothy liq-
uids like milkshakes.
• Smoothie recipes - never blend frozen
ingredients that has formed a solid mass