T&S B-0107 Manual Del Usuario página 5

General Instructions
Bonnet Assembly Replacement
Your replacement parts kit is provided with extra components to allow you to repair
your no.3 whether you have the old or the new design. For best results, no.16, no.13,
and no.14 should be used as a set - use either "old" style components together or
"new" style components together.
* Kits supplied with no.13 and 14: Use the replacement no.14 that matches the size of
the one removed from the no.3 assembly to be repaired. If the no.13 from the no.3 to
be repaired is of the old variety, it should be cleaned and reused for best results (old
no.13 design is no longer available). Otherwise, use the new stem provided with your
kit.
* Kits supplied with just the no.14: Use the replacement no.14 that matches the size of
the one removed from the no.3 assembly to be repaired.
Old Bonnet Design
Old Stem Design
.685
Old Stem Washer Design
ridge
New Bonnet Design
New Stem Design
black
rubber
grey or
yellow
rubber
New Stem Washer Design
5
.685
yellow rubber