Working Mode Description; Normal Mode - Viper AS6690T-US Manual De Instrucciones

INSTRUCTION FOR USE

WORKING MODE DESCRIPTION

HOW TO OPERATE

Normal mode

Key (42) on
One button start (49) on
Key (42) on
One button start (49) on
Safety switch (35) on
Silent mode
Key (42) on
One button start (49) on
Key (42) on
One button start (49) on
Press vacuum system adjustment but-
ton (50) on for 1 second
Safety switch (35) on
Off mode
Safety switch (35) off
One button start (49) off
Key (42) on
Key (42) off
DISPLAY
9
DESCRIPTION
1: Hour meter point does not flash.
2: The brush arrow does not rotate.
3: The fan does not flash.
4: The tap water does not flash.
5: The actuator puts down to the first level pressure.
1: Hour meter point flashes.
2: The brush arrow rotates.
3: The fan flashes. (Four blades）
4: The tap water flashes.
1: Hour meter point does not flash.
2: The brush arrow does not rotate.
3: The fan does not flash.
4: The tap water does not flash.
1: Hour meter point flashes.
2: The brush arrow rotates.
3: The fan flashes. (Three blades）
4: The tap water flashes.
1：Hour meter point does not flash .
2：All panel button closure.
（The vacuum motor delays 12 seconds to stop .)
3：The brush head puts up to the highest position.
The power cut off.
1.
The display is off.
2.
Note: After turning off the one button start (49), wait un-
til the brush head raises to the full up position, before
turning off the key (42).
ENGLISH