Adapting Microwave Blower; Mount The Microwave Oven - Cafe CVM517P2MS1 Instrucciones De Instalación

C4.

ADAPTING MICROWAVE BLOWER

FOR RECIRCULATION (cont.)
6
7
Close the blower door. Slide blower shield onto
the top of the blower door opening.
8 Secure the blower to the microwave using the
blower retaining screws from Step 1.
22
Installation Instructions
Screw
Blower
Screws
Back of
Microwave
Oven
C5. MOUNT THE MICROWAVE
OVEN
CAUTION FOR EASIER INSTALLATION
AND PERSONAL SAFETY, WE
RECOMMEND THAT TWO PEOPLE INSTALL THIS
MICROWAVE OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE:
grommet around the power cord hole to prevent
cutting of the cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT: If filler blocks are not
used, case damage may occur from
overtightening screws.
NOTE: When mounting
the microwave oven,
thread power cord
through hole in bottom of
top cabinet. Keep it tight
throughout Steps 1–3. Do
not pinch cord or lift oven
2
up against cabinet
bottom.
1
forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting
plate.