Craftmade Copeland Guia De Instalacion página 9

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

10. Light Kit Assembly (Optional). (cont.)
Gently push wires from light kit fitter (one by one)
through hole in middle of switch housing and screw
switch housing onto threaded rod followed by lock
washer and hex nut that were previously removed.
Tighten hex nut over lock washer for a secure fit.
Connect WHITE wire from light kit fitter to WHITE
wire from switch housing. Connect BLACK wire from
light kit fitter to BLUE (or BLACK) wire from switch
housing. Be sure molex connections snap together
securely.
Connect female plug from switch housing to male
plug from motor housing, matching up the colors on
the male plug with the colors on the female plug for
correct fit. Make sure plugs connect completely.
Align holes in switch housing with holes in switch
housing plate. To attach switch housing, re-insert
screws that were previously removed. Securely
tighten all 3 screws with a Phillips screwdriver.
Install 2 medium base compact fluorescent 13 watt
bulbs (included).
Important: When replacing bulbs, please allow bulbs
and glass shade to cool down before touching.
Remove finial, finial plate and threaded washer from
threaded rod on light kit fitter.
Raise glass shade in order to guide pull chains
through corresponding holes in glass shade. Align
threaded rod on light kit fitter with hole in middle of
glass shade and push up gently allowing threaded
rod to come through hole. (Be sure pull chain for fan
operation does not rub against bulb during operation.)
Secure glass shade with threaded washer. Do NOT
overtighten threaded washer as glass may crack or
break.
Thread pull chains through corresponding holes in
finial plate, allowing threaded rod to come through
hole in middle of finial plate, and push up. Thread
center pull chain through hole in finial and re-attach
finial. Do NOT overtighten finial as glass may crack or
break.
Hg
LAMP CONTAINS MERCURY
Manage in accordance with Spills, Disposal and Site Cleanup
Requirements. In case of breakage, follow clean-up
procedures provided by contacts below.
www.epa.gov/cflcleanup
1-866-284-4010
male plug
female plug
light kit fitter
threaded rod
threaded washer
finial
page 8
hex nut
lock washer
BLACK
BLUE (or BLACK)
WHITE
WHITE
molex
connections
switch
housing
light
kit
fitter
motor
housing
switch
housing
plate
switch
housing
bulb
glass
shade
finial plate

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Cn52Cn52obg5-wgCn52bnk5Cn52w5Cn52obg5

Tabla de contenido